Skip to main content

Huawei Installation

For installation and configuration of Huawei Residential Inverters: Sun2000 to be connected to Fever Cloud.

Updated over 4 months ago

Required hardware and firmware

Version of dongle

Firmware version of dongle

Firmware version of inverter

Firmware version of BMS

02312QMV-004 SDongleA-05; Fixed Ethernet

02314ALM-003 SDongleB06-EU; 4G dongle

V200R022C10SPC121 or newer

V100R001C00SPC165 or newer

FusionSolarDG V100R002C00SPC621 or newer

Process of updating hardware and firmware (if needed)

Replacing a dongle

Process of updating firmware

Use the “Replacing a Device” function for replacing dongle.

The steps of changing Dongle to “02312QMV-004 SDongleA05”

  1. Check the home router to confirm DHCP is enabled for the ethernet ports

  2. Check Fusionsolar with APP to confirm that inverter/dongle/batteries are working normally

  3. Remove the existing dongle Check Fusionsolar with APP to confirm that inverter/dongle/batteries are offline

  4. Connect ethernet cable to new dongle. As shown in the “FE Communication” of quick installation guide of new dongle

  5. Copy the SN of the dongle for later pasting Plug new Dongle to inverter. Wait 5 minutes for dongle to boot up

  6. Follow the “Replacing a Device” from the user manual to put the newly installed dongle into the power plant. Paste the SN of the dongle into Fusionsolar APP

  7. Check Fusionsolar with APP to con irm that inverter/dongle/batteries are

Installers can update software by creating a new update task

  • Choose Plants > Devices > Update Management

  • On the Device Upgrade tab page, click Create

Required hardware and firmware

Connecting dongle to Fever cloud

Configuration guidance can be found from “24.6.0 FusionSolar SmartPVMS User Manual(Installer)”

  • Choose Monitoring > Monitoring from the main menu

  • In the navigation pane, select the WLAN/FE Smart Dongle in the PV+ESS+Charger plant and click Configuration

  • In the Management System - 1 area, set parameters related to Fever management system

  • Click Set

Note: The Fever server domain name/ip address and tcp port info must be configured per inverter

Note: Access to installer account needed since the configuration of “management system-1” requires installer account

Related documents

  • FusionSolar SmartPVMS User Manual (Owner)

  • FustionSolar SmartPVMS User Manual (Installer)

  • SDongleA-05 Smart Dongle Quick Guide (WLAN-FE)

Did this answer your question?